10 Ton Gas Fired Steam Boiler 10000Kg/Hr Running Low Consumption Fuel

10 ton steam boiler Gas Fired Steam Boiler 10000Kg/hr Running Low Consumption Fuel

Brief intrduction of 10 ton steam boiler Gas Fired Boilers

1. Three-way wet back structure.

2. 10 ton steam boiler has a large combustion chamber, which not only increases the heating area, but also reduces the volume of the boiler.

3. 10 ton steam boiler use a multi-stage sealing method to ensure no smoke leakage.

4. Horizontal structure, sufficient heating area, sufficient heat transfer to ensure stable and efficient operation of the boiler.

5. 10 ton steam boiler has big steam evaporation surface, high quality steam .

6. Automatically operation,PLC control, through the acoustooptic display equipment operating parameters and fault alarm.

Quick Details of 10 ton steam boiler

10 ton steam boiler application fields

1. Food Industry

Industrial 10 ton steam boiler for food & beverage industry is used in the processes of distillation, sterilization, disinfect, extraction, drying, and curing, etc. The boiler should be clean and environmental protection, so, 10 ton steam boiler is better to use the clean energy as the fuel, such as natural gas, biomass fuel, and electricity.

2. Brewery/Brewhouse

In brewery, steam is used for drying green malt, gelatinizing/saccharifing raw materials, boiling wort, fermenting beer, and pasteurizing bottles. Otherwise, hot water is also used for sanitization. Generally, the 10 ton steam boiler with 0.5ton~2ton capacity is enough for a brewery, while, based on the production ability, the 10 ton steam boiler capacity is a little different.

3. Sugar Mill

In sugar mill, steam plays a significant role for the processes of heating, gelatinization, and saccharify. The 10 ton steam boiler temperature needed is from about 30℃ to 80℃.There is a heating equipment under the mash kettle, steam enter into the heating equipment and then heat the raw material in mash kettle. 10 ton steam boiler is used for heating, gelatinization, and saccharify, etc.

4. Textile Industry

Industrial 10 ton steam boiler plays a significant role in the textile industry, the 10 ton steam boiler is used for different processes, such as dyeing and drying, and support the use of resing finishing stenter, dyeing machine, drying room, and mixing mill, etc. The needed temperature of textile process is 60~180℃. 10 ton steam boiler developed a wide range of industrial boilers that could be used for textile industry.

5. Paper Processing Industry

In paper processing industry, there are many processes (drying, corrugating, boiling, etc.) that need steam. For example, steam is necessary for drying, after squeezing, the paper still contain a large amount of water (53%~70%), then 10 ton steam boiler is used for drying paper, and combine used with the cast iron dryer.

10 ton steam boiler design auxiliaries:

1. Equipped with world famous burners and valve sets, such as Baltur, Riello, Weishaupt, Oilon, etc., for full combustion, stable performance and low failure rate

2. Waveform furnace and screw pipe design can provide larger heating area, improve the ability of radiation heat transfer, improve thermal efficiency

3. Equipped with the condensing waste heat recovery device, which absorbs the smoke and gas eliminated by the boiler, greatly improves the boiler's thermal efficiency, reaching more than 100.9%

4. Adopt self-developed large LCD screen and PLC control system to keep abreast of the operation of boiler system.

5. Equipped with a variety of safety control devices, such as boiler temperature is too high, pressure is too large, the water level is too low, the boiler automatically stop operation, greatly improve the boiler operation safety factor.

6. Equipped with special explosion-proof door, automatic rebound after pressure relief, to ensure the safe and efficient operation of the boiler.

10 ton steam boiler technical datasheet

Gas Fired Boilers FAQ:

​
Dear friend,
Thanks for your time for scanning our products.
We need the following information to confirm the boiler model:
1.Boiler type: 10 ton steam boiler
2.Boiler capacity?
3. Boiler pressure?
4. Boiler application?
After confirming these questions, we will know exactly what boiler will be suitable for you and we will provide you our product details and quotation. Thank u.
It is ok to copy the question and answers directly when sending us the inquiry!
Welcome you any time!