Fire Tube Chain Grate Thermo Oil Boiler / Biomass Fired For Wood Processing

Fire Tube Chain Grate thermo oil boiler with coal fired/biomass fired for wood processing

The YLW series of thermo oil boilers are horizontal assembled boilers with square coil structure and chain grate. The thermo oil boiler can realize automatic fuel filling, equipped with blower and induced draft fan for mechanical ventilation, and is equipped with fully automatic slag discharge machine. When the thermo oil boiler is in normal operation, the fuel enters the furnace from the grate for combustion. The flame passes through the refraction, enters the front smoke box from the combustion chambers on both sides of the body, and then enters the economizer through the rear smoke box, and finally enters the dust collector, and the induced draft fan is taken from the chimney. discharge.

Thermal flooding boilers structural features
1. The radiation heating surface of the boiler body is composed of a single furnace or a double-row square coil, and the convection heating surface is composed of a serpentine coil.

2. According to the fuel characteristics, the company designed the cleaning device of the heat transfer oil furnace according to the high and low misalignment and the large spacing, which reduced the failure frequency of the boiler.

3. Compared with traditional coal-fired boilers, it has a larger furnace combustion space to adapt to the combustion of different biomass fuels.

4. The grate is composed of high temperature resistant materials, and a reasonable layout of air cooling is designed at the same time, which increases the reliability of the grate and has a long service life.

5. The Thermal flooding boilers use high-quality insulation materials and special processing technology, the insulation effect is very good.

6. When the thermal boiler is heated, the automatic gas protection welding process and equipment are used for X-ray on-line inspection. The welding quality is stable and reliable.

Thermal fluid heater performance advantage
1. Energy saving
The thermal boiler tail can be equipped with an air preheater, a steam waste heat boiler, and a hot water economizer for waste heat recovery, which reduces the exhaust gas temperature and saves fuel.

2. Efficient
The thermal boiler has a double-row coil and has a sufficient heating area, which effectively reduces the heat of the boiler surface and has higher combustion efficiency.

3. Security
The thermal fluid heater adopts a three-return structure, the heat-conducting oil passes through the convection tube and the radiant coil, the flow rate is uniform, and the boiler operation is safe and reliable.

4. Reliable
The thermal fluid heater is equipped with heating temperature, medium temperature, pressure and flue gas temperature monitoring and protection measures to ensure safe and reliable operation of the equipment.

Thermic fluid boiler technical data sheet

Hot oil boiler  FAQ:
 
Dear friend,
 
Thanks for your time for scanning our products.
We need the following information to confirm the boiler model:
1.Boiler type: Coal/biomass fired thermal boiler
2.Boiler capacity?
3. Boiler pressure?
4. Boiler application?
After confirming these questions, we will know exactly what boiler will be suitable for you and we will provide you our product details and quotation. Thank u.
 
It is ok to copy the question and answers directly when sending us the inquiry!
 
Welcome you any time!