Oil Gas Fired Thermal Oil Boiler Hot Oil Heater 1200kw Simple Operation

1200kw Oil Gas Fired Thermal Oil Boiler Hot Oil Heater Factory Directly Industrial

YY (Q) W series gas fired thermal oil heater is fueled by heavy oil, light oil or flammable liquid oil. The heat transfer oil is a heat carrier. The circulating oil pump is used to force the liquid phase to circulate. After the heat is transferred to the heating equipment, it is returned to the reheated DC special industrial furnace. Widely used in such as petrochemical, textile, printing and dyeing, plastics, rubber, food processing, wood processing, asphalt heating, carton production, vegetable dehydration, baking varnish, casting sand mold drying, etc., can also be used for ≤ 350℃ baking, steaming, shaping , melting, drying.

thermal oil heater features

1. It can obtain higher working temperature (≤320°C) under lower operating pressure (<0.5Mpa), and reduce the pressure rating of heat equipment, which can improve the safety of the system.

2, heating evenly and softly, temperature conditioning selects PID self-tuning intelligent control, high temperature control accuracy (≤ ± 1 ° C), can meet the strict requirements of high technical specifications.

3, small size, small footprint, equipment in the use of thermal equipment adjacent to coal-fired coal slurry heat transfer oil boiler technical parameters, no need to set up a boiler room, do not need to set up a dedicated operation, can reduce equipment funding and operating costs, recovery of capital .

4. The operation control and safety monitoring equipment are completely complete, the heating process is fully automatic, the operation is simple and convenient, and the equipment is convenient.

5, closed loop heating, small heat loss, significant energy-saving effect, no environmental pollution, the use of a wide range.

6, with low temperature type (≤180 °C), medium temperature type (≤300 °C), full product specifications, user selection scale.

Advantages

1. Easy to install, as long as the upper body and the lower combustion chamber are closed, the installation period is short.

2. The heated surface adopts a close-packed disc tube, and the heated surface is arranged sufficiently to reduce the heat load on the surface of the tube, so that the heat transfer oil is safer to use.

3. The medium flow is reasonable. The heat transfer oil field is low (imported) to (export), and the gas generated during operation improves the thermal efficiency of the boiler.

4. The fuel is adiabatic in the combustion chamber, which makes the combustion fire easier, burns more fully, and better improves the thermal efficiency of the passage.

5. The top of the boiler is equipped with a densely packed coil, which can better protect the top of the furnace and avoid the burning of the top of the furnace.

Thermal oil heater technical data as follows