Gas Fired Thermal Oil Boiler 320C High Temperature Oil Fired Thermic Fluid Heater

Cheap and Best 320C High Temperature Oil Heating Oil System Boiler Thermic Fluid Heater Price

Thermic Fluid Heater is a new type of special boiler, also known as a heat-conducting oil furnace, which has low-pressure and high-temperature working characteristics, and its heating temperature can reach 340 ° C in liquid phase or 400 ° C in vapor phase. Any process that requires uniform and stable heating between 150 ° C and 320 ° C and does not allow direct heating of the flame can be heated by an organic heat carrier.

The Thermic Fluid Heater generally uses coal, oil and steam as fuel, and heat transfer oil as medium. The hot oil circulation oil pump is used to force the medium to perform liquid phase circulation, and the heat energy is transferred to the heat equipment and then returned to the heating furnace for reheating, which has a low High operating temperatures are achieved under pressure and high precision control of media operation.

The system has high heat utilization rate and convenient operation and maintenance. It is an ideal heating device with safety, high efficiency and energy saving.

Design features and benefits

The heat transfer oil is non-corrosive and does not freeze: the heat transfer oil does not corrode like the same scale. Since the heat transfer oil does not contain precipitated solid matter which is generated after being heated, it eliminates expensive water treatment facilities and costs for corrosion prevention equipment. Natural or synthetic heat transfer oils available on the market are resistant to freezing at low temperatures. The heat transfer oil furnace does not need high pressure: when the steam is at 170 ° C, the pressure is 100 PSIG. When the temperature rises to 300 ° C, the pressure can reach 1500 PSIG. However, after the heat transfer oil is changed, such temperature can be obtained at low pressure. Efficient four-return design, comprehensive and uniform heating, low thermal inertia: air enters the boiler from the air inlet of the lower burner of the boiler, and then passes through the jacket between the inner and outer layers of the heat-conducting oil furnace from bottom to top to reach the burner at the top. During this process, the air is preheated, and the preheated air enters the combustion chamber, passes through four return strokes, and is then discharged from the chimney.

Performance characteristics:

1. Obtain low-pressure high-temperature heat medium, convenient adjustment, uniform heating, and process temperature that can be satisfied.

2, liquid phase circulating heating, no condensation heat loss, heating system high thermal efficiency.

3. The working medium is subject to heat and heat release and the temperature rises and falls to the volume change, and there are compensation technical measures in the system.

4. There are technical measures to strictly control the air, moisture and other low volatile matter content in the working medium before circulating heating.

Factory assurance:

1. One year warranty for boiler,20years boiler life .

2. Spare parts available at ex-factory price

3. Different voltage available

4. 100% tested before delivery

5. Skid-mounted complete system available 100-- 2000 kg/h.

6. Complete system fixed in container available 100-- 4000kg/h.

7. Engineer on-site instruction of installation and commissioning available.

Running advantages :

1. It can obtain higher working temperature (≤320°C) under lower operating pressure (<0.5Mpa), and reduce the pressure rating of heat equipment, which can improve the safety of the system.

2, heating evenly and softly, temperature conditioning selects PID self-tuning intelligent control, high temperature control accuracy (≤ ± 1 ° C), can meet the strict requirements of high technical specifications.

3, small size, small footprint, equipment in the use of thermal equipment adjacent to coal-fired coal slurry heat transfer oil boiler technical parameters, no need to set up a boiler room, do not need to set up a dedicated operation, can reduce equipment funding and operating costs, recovery of capital .

4. The operation control and safety monitoring equipment are completely complete, the heating process is fully automatic, the operation is simple and convenient, and the equipment is convenient.

5, closed loop heating, small heat loss, significant energy-saving effect, no environmental pollution, the use of a wide range.

6, with low temperature type (≤180 °C), medium temperature type (≤300 °C), full product specifications, user selection scale.

Thermal oil heater technical data as follows