Automatically Wood Chip Biomass Boiler / Coconut Shell Fuel Wood Pellets Boiler

New design Automatically Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler For Wood Factory

Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Characteristics

1. DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Suitable for combustion shaped biomass fuel, pure coal or dual fuel.

2. With a draft fan for mechanical ventilation

3. Equipped with scraper slag remover, or spiral slag discharge machine to achieve mechanical slagging

4. The control and monitoring instruments are complete, and the boiler operation is safe and reliable.

Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Datasheet:

Boiler model: DZL3-1.25-SC

Boiler capacity output :3ton/h,3000kg/hr,200HP

Boiler Pressure:1.25Mpa

Radiation heating area:11.2m2

Convection heating area:67.74m2

The heating area of the economizer:43.6m2

Effective grate area:4.41m2

Fuel consumption:546.32kg/h

Feed temperature:20℃

Exhaust temperature:142.87℃

Design efficiency:83.27%

Boiler water capacity:7.27

Water test pressure:1.65Mpa

The chimney:φ400X35000MM

Design of fuel: biomass, Coconut shell, wood chips

3 ton Boiler bulk transport weight:19.5tons

Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Competitive Advantage:

1. Drum layout from top to bottom is compact and uniform heating. The water wall design with a membrane wall. It will prevent boiler furnace heat loss effectively

2. Water cycle structure increases heated areas and improves the water cycle effects, especially improve the DZL 3 - 1.25 - SC Biomass Fired Steam Boiler thermal efficiency.

3. Two parts assemble on customer site finally, which short the installation work and low the installation costs.

4. Body adopts the dual-rear-drum vertical structure, full layout heating surface and high thermal efficiency.

5. Mechanization combustion, environmental protection and energy conservation.

6. Auxiliary equipment, controlled panel PLC with a high level

7. Body and base use two pieces to leave the factory, installed in a short period and low installation costs.

8. DZL 3 - 1.25 - SC Biomass Fired Steam Boiler evaporation capacity is 3000kg/h, design pressure is 1.25 to 2.5Mpa and thermal power is 7MW.