Fast Installed Wood Burning Steam Boiler / Hand Fired Wood Fired Steam Boiler 3 Tons

DZH3 ton biomass-fired boilers Manufacturers supply a new generation of fast-installed hand-fired 3 tons of firewood

Biomass Fired Boilers Characteristics

1. Biomass Fired Boilers tall furnace is easy to fully burn the biomass fuel, and the high efficiency furnace arch is designed according to the combustion characteristics of the biomass fuel to improve the progress of the fuel and eliminate the black smoke.

2. It adopts high-strength scale flakes, which is suitable for the transportation and combustion of biomass fuel. It is used to pretend the roller device with large grate to improve the safety of the grate and facilitate combustion adjustment.

3. Unique high-level feeding, allocated to the feeding device, adapted to the biomass briquetting molding fuel to prevent the fire from burning before the fire

4. Biomass Fired Boilers unique secondary air supply device blows the flame back, prevents the flame from entering the hopper, strengthens the oxygen supply, promotes combustion, and prevents black smoke generation.

5. Reasonably arrange the heating area and combustion device, Biomass Fired Boilers thermal efficiency is 5 percentage points higher than the national standard

6. Reasonable smoke speed design, the heated surface does not accumulate dust, does not wear, the boiler heating surface can maintain high efficiency, full load and safe operation for a long time under the condition of no soot blowing.

7. All independent circuit design, for the hot water boiler, also uses a reasonable ejector cycle, the medium flow rate in the heating surface circuit is higher than the national standard requirements.

8. Inertial separation of soot at the exit of the furnace, effectively reducing the dust content of the exhaust and reducing the wear on the rear heated surface.

9. Compact structure, smaller installation volume than other types of boilers of the same capacity, shortening the installation period and reducing the cost of the boiler room.

10. The large volume of water is conducive to power outage protection and strong ability to adapt to load changes.

Biomass Fired Boilers Application

1. Chemical industry: Steam is an indispensable source of heat and power in petrochemical enterprises. The chemical is heated and dissolved, such as sodium hydroxide, sodium sulfate, sodium carbonate, etc.

2. School: Students wash water

3. Hospital: for hospital appliances

4. Paper mill: Steam is used in many parts of the papermaking process. For example, preheating of raw materials, steam heating during cooking, and drying of the dryer section of the paper machine. There is also a special section in the papermaking. Alkali recovery is based on the steam from the furnace.

5. Dairy factory: When the milk factory is produced, it needs a lot of steam and hot water for sterilization and power.

6. Winery: Liquor is a kind of distilled liquor unique to China. It is one of the world's eight major distilled liquors. It is made from starch or sugary raw materials and is distilled after fermentation.

7. Food Factory: The hot water and steam generated by the boiler are widely used in the process of distillation, extraction, disinfection, drying, and maturation in food processing and high-temperature steam is used to cook, dry and disinfect food.

Biomass Fired Boilers Technical data:

welcome for your inquiry any time!